One common misconception is that these must be presented as a set of documents, but there are toolsets and applications available that capture the content and intent of these deliverables without creating a document or set of documents. The goal is to capture the required content in a useful and consistent framework as concisely as possible.
Test plan :At a minimum the test plan presents the test: objectives, scope, approach, assumptions, dependencies, risks and schedule for the appropriate test phase or phases. Many test organizations will use the test plan to describe the software testing phases, testing techniques, testing methods and other general aspects of any testing effort. General information around the practice of testing should be kept in a "Best Practices" repository -- testing standards. This avoids redundant and conflicting information from being presented to the reader and keeps the test plan focused on the task at hand –- planning the testing effort. (See "The role of a software test manager".)
Objectives -- mission statementThe objective of the current testing effort needs to be clearly stated and understood by the software testing team and any other organization involved in the deployment. This should not be a sweeping statement on testing the "whole application" -- unless that is actually the goal. Instead the primary testing objectives should relate to the purpose of the current release. If this were a point-of-sale system and the purpose of the current release was to provide enhanced online reporting functionality, then the objective/mission statement could be this:
"To ensure the enhanced online reporting functionality performs to specification and to verify any existing functionality deemed to be in scope."
The test objective describes the "why" of the testing effort. The details of the "what" will be described in the scope portion of the test plan. Once again, any general testing objectives should be documented in the "Best Practices" repository. General or common objectives for any testing effort could include expanding the test case regression suite, documenting new requirements, automating test cases, and updating existing test cases.
In scope:The components of the system to be tested (hardware, software, middleware, etc.) need to be clearly defined as being "in scope." This can take the form of an itemized list of those "in scope": requirements, functional areas, systems, business functions or any aspect of the system that clearly delineates the scope to the testing organization and any other organization involved in the deployment. The "What is to be tested?" question should be answered by the in scope portion of the test plan -- the aspects of the system that will be covered by the current testing effort.
Out of scopeThe components of the system that will not be tested also need to be clearly defined as being "out of scope." This does not mean that these system components will not be executed or exercised; it just means that test cases will not be included that specifically test these system components. The "What is NOT to be tested?" question should be answered by the out of scope portion of the test plan. Often neglected, this part of the test plan begins to deal with the risk-based scheduling that all test organizations must address -- What parts of the system can I afford not to test? The testing approach section of the test plan should address that question.
ApproachThis section defines the testing activities that will be applied against the application for the current testing phase. This addresses how testing will be accomplished against the in scope aspects of the system and any mitigating factors that may reduce the risk of leaving aspects of the system out of scope.
The approach should be viewed as a to-do list that will be fully detailed in the test schedule. The approach should clearly state which aspects of the system are to be tested and how: backup and recovery testing, compatibility/conversion testing, destructive testing, environment testing, interface testing, parallel testing, procedural resting, regression testing, application security testing, storage testing, stress and performance testing, and any other testing approach that is applicable to the current testing effort. The reasoning for using any given set of approaches should be described, usually from the perspective of risk.
In scopeAssumptions are facts, statements and/or expectations of other teams that the test team believes to be true. Assumptions specific to each testing phase should be documented. These are the assumptions upon which the test approach was based. Listed assumptions are also risks should they be incorrect. If any of the assumptions prove not to be true, there may be a negative impact on the testing activities. In any environment there is a common set of assumptions that apply to any given release. These common assumptions should be documented in the "Best Practices" repository; only assumptions unique to the current testing effort and perhaps those common assumptions critical to the current situation should be documented.
DependenciesDependencies are events or milestones that must be completed in order to proceed within any given testing activity. These are the dependencies that will be presented in the test schedule. In this section the events or milestones that are deemed critical to the testing effort should be listed and any potential impact or risks to the testing schedule itemized.
RisksRisks are factors that could negatively impact the testing effort. An itemized list of risks should be drawn up and their potential impact on the testing effort described. Risks that have been itemized in the project plan need not be repeated here unless the impact to the testing effort has not already been clearly stated.
Schedule The test schedule defines when and by whom testing activities will be performed. The information gathered for the body of the test plan is used here in combination with the available resource pool to determine the test schedule. Experience from previous testing efforts along with a detailed understanding of the current testing goals will help make the test schedule as accurate as possible. There are several planning and scheduling tools available that make the plan easier to construct and maintain.
Test caseTest cases are the formal implementation of a test case design. The goal of any given test case or set of test cases is to detect defects in the system being tested. A test case should be documented in a manner that is useful for the current test cycle and any future test cycles. At a bare minimum, each test case should contain the author, name, description, step, expected results and status.
Test case nameThe name or title should contain the essence of the test case, including the functional area and purpose of the test. Using a common naming convention that groups test cases encourages reuse and helps prevents duplicate test cases from occurring.
Test case descriptionThe description should clearly state the sequence of business events to be exercised by the test case. The test case description can apply to one or more test cases; it will often take more than one test case to fully test an area of the application.
Test case stepEach test case step should clearly state the navigation, data and events required to accomplish the step. Using a common descriptive approach encourages conformity and reuse. Keywords offer one of the most effective approaches to test case design and can be applied to both manual and automated test cases.
Expected resultsThe expected results are the expected behavior of the system after any test case step that requires verification or validation. This could include screen pop-ups, data updates, display changes or any other discernable event or transaction on the system that is expected to occur when the test case step is executed.
StatusThis is the operational status of the test case. Is it ready to be executed?
Documenting defectsThe primary purpose of testing is to detect defects in the application before it is released into production. Furthermore, defects are arguably the only product the testing team produces that is seen by the project team. Document defects in a manner that is useful in the defect remediation process. At a bare minimum, each defect should contain the author, name, description, severity, impacted area and status.
Defect nameThe name or title should contain the essence of the defect, including the functional area and nature of the defect.
Defect descriptionThe description should clearly state what sequence of events leads to the defect. When possible include a screenshot or printout of the error.
How to replicateThe defect description should provide sufficient detail for the triage team and the developer fixing the defect to duplicate the defect.
Defect severityThe severity assigned to a defect is dependent on the phase of testing, impact of the defect on the testing effort, and the risk the defect would present to the business if the defect was rolled-out into production.
Impacted areaThe Impacted area can be referenced by functional component or functional area of the system. Often both are used.
Status reportA test organization and members of the testing team will be called upon to create status reports on a daily, weekly, monthly and project basis. The content of any status report should remain focused on the testing objective, scope and scheduled milestones currently being addressed. It is useful to state each of these at the beginning of each status report and then publish the achievements or goals accomplished during the current reporting period, as well as those that will be accomplished during the next reporting period.
Any known risks that will directly impact the testing effort need to be itemized here, especially any "showstoppers" that will prevent any further testing of one or more aspects of the system.
Reporting periodThis is the period covered in the current status report. Include references to any previous status reports that should be reviewed.
Mission statementThe objective of the current testing effort needs to be clearly stated and understood by the testing team and any other organization involved in the deployment.
Current scopeThe components of the system being tested (hardware, software, middleware, etc.) need to be clearly defined as being "in scope," and any related components that are not being tested need to be clearly itemized as "out of scope."
Schedule milestonesAny schedule milestones being worked on during the current reporting period need to be listed and their current status clearly stated. Milestones that were scheduled but not addressed during the current reporting period need to be raised as risks.
RisksRisks are factors that could negatively impact the current testing effort. An itemized list of risks that are currently impacting the testing effort should be drawn up and their impact on the testing effort described.
David W. Johnson
David W. Johnson
No comments:
Post a Comment